PURPOSE AND CHARACTERISTIC
XTL 34 00 radar reflector is one of the indispensable equipment to lifeboats and liferafts,it’s performance complys with the requirements of IMO Resolution A 384. This device have the purpose to increase radar search capacity of boat with a low reflection propriety.as lifeboat in wood or plastic and signaling buoy.
The radar reflector is manufactured by light alloy.Provided with head plastic protections.It is of feasible construction and good performance ,light weight,and small size,it does not require for electric power and is reliable in safety use. It is also useful for fieldworkers.
INSTALLMENT AND OPERATING INSTRUCTION
1）Cross the two square plates along the transversal long cuts and apply,pressing them strong, the black plastic protection fittings on the already crossed corner edges.
2）Join the two triangles one by the previouslt set unit, taking care to apply the pertaining black plastic protection piece in each cross-shaped croner.
3）Insert throuhot the six black plastic protections which ensure a fautless linkage of your radar reflector.
4）Hang your radar reflector by means of a halyard or a heaving line at a height of a least three meters above the float level setting it as plumbed as possible. This will allow taking the best advantage of the reflector.
Article Mesure-size(mm) Inches Model
XTL 34 00 041 215×215×300 12’’ Stancard
XTL 34 00 043 305×305×405 16’’ R.O.R.C
XTL 34 00 046 340×340×470 18’’ I.O.R and R.O.R.C